The Exhalation Valve Assembly contains a diaphragm, a seal, an exhalation valve housing, expiratory flow sensor, an O-ring, a plunger, a spring and a water trap. It comes under the respiratory module. It vents the respiratory gases from the patient to the atmosphere at the expiration phase. The valve opens after an inspiration is compl

The D-Fend+ Water Trap is designed to protect the respiratory measurement system from viruses, water, mucus and bacterial contaminants, which can harm the gas module and affect measurement accuracy. The sampled gases are transported from the patient into the D-Fend+ water trap. The D-Fend+ water trap contains a GORE-TEX® membrane which

The Cable - Neonatal Flow Sensor is a cable that is used in anesthesia and Engstrom machines. One end is circular snap type female connector made up of polyamide material and the other end is glass-filled nylon material connector with tin plating and steel shell. Both ends are connected by cable with 4 conductors tinned copper of 26 ga

The Pedi-Lite+™ Spirometry Sensor is a specially designed part, for use in CARESCAPE™ respiratory modules, pulse oximeter and other medical equipment as applicable. The device accurately senses respiratory and ventilator parameters. The sensor, when placed at the vicinity of patient's airway provides continuous, reliable and accurate i

Spirometry is one among a type of pulmonary function test. It helps to measure the volume of air and the speed of air flow from a patient’s breath. The data can be used to evaluate the patient's lung based on the inputs collected. The spirometry sensor is set up with one inlet measuring the pressure inside the spirometer tubing and the

The Pediatric Sensor is used to take measurements along with GE monitors and the patient spirometry function. The Pedi-lite are used for patients with certain limited tidal volumes. Select the correct sensor type in the patient spirometer menu. Examine the lower tidal volume limit from the monitor manual and module, as the monitor does

The D-Lite+™ Spirometry Sensor is a specially designed part, for use in CARESCAPE™ respiratory modules, pulse oximeter and other associated GE medical equipment as applicable. The device accurately senses respiratory and ventilator parameters. The sensor is comprised of three ports, one is used for the analysis of lateral flow gases an

Mini D-fend water traps are designed to protect the gas measurement system from moisture, humidity and contaminants, which can harm the gas module and affect measurement accuracy. Mini D-fend water traps are indicated for use with CARESCAPE Respiratory Modules monitoring respiratory and ventilatory parameters in anesthesia and critical

The Water Trap D-fend is used in the airway modules of anesthesia devices. The operator should verify that the water trap container is empty and properly attached before connecting to the patient. Before connecting the exhaust line to the sample gas outlet on the compact airway module, ensure the other end is connected to the sample ga

GE Healthcare’s gas sampling lines are designed for monitoring CO2, O2, N2O, and anesthetic agents with GE Healthcare side stream respiratory monitoring modules. Sampling lines play a crucial role in ensuring measurement accuracy, preventing nuisance monitoring alarms and maximizing patient safety.

Gas sampling lines are specifi